HOW TO: INSTALL A MINIRACER CRF110 / CRF50 FACTORY SERIES CHAIN GUIDE
A Chain Guide is a must have item for almost any Off Road Motorcycle. If you're planning on ripping ruts and having fun on your Pit Bike, its one of the first mods we make. Here below are the install instructions for our MiniRacer Factory Series Chain Guide for the CRF110 and CRF50. As always, if you have any questions about this, or anything to do with your Pit Bike or Mini Bike, drop us an email on the contact form on the home page!
- (CRF110 Stock Swingarm Only – CRF50 and all aftermarket swingarms skip to step 2) - After removing the stock chain guard, enlarge the two holes on the swingarm using an 8mm drill.
- Remove the top allen bolt and spacer from the chain guide using a 4mm Hex Key and 10mm spanner or socket, position chain guide over chain as per below, then reinstall allen bolt and spacer.
- Install chain guide using your supplied High Tensile Allen Bolts and Alloy Spacers, as per below. Spacers can be added accordingly to get spacing correct pending model of bike and swingarm.
- Admire your work and go rip!